W30 Smart EC IEC

SKU: W30-SMRT-EC-01

The W30 Smart EC is a simple and efficient solution for air moving applications that require speed adjustment. The total system efficiency (motor + drive) meets high efficiency level.

download

Description

W30 Smart EC

Standard Features:

  • Permanent Magnet, Electronically Commutated Motor
  • Single-phase, 220 to 277 VAC, 50/60 Hz input
  • Output power:0,12 to 1,1 kW at 1500, 1800 or 3000 rpm; Mounting: IEC80 B3L
  • Three-phase, 380 to 480 VAC, 50/60 Hz input
  • Output power:0,12 to 4 kW at 1500, 1800 or 3000 rpm; Mounting: IEC80 and IEC100, B3T
  • Aluminum frame, degree of protection IP55
  • Ambient temperature: -20 to 40°C (TENV)1; or -20 to 60°C (TEAO)2
  • Total efficiency (motor + drive) – IE63
  • Vibration Grade A
  • Direction of rotation CW/CCW (selectable)
    Continuous speed adjustment (200 to 1500/1800 rpm and 500 to 3000 rpm) by:
  • Tact buttons (local)
  • DC voltage (remote): 2 to 10 VDCD
  • C current (remote): 4 to 20 mA DC
  • Frequency (remote): 10 to 95%
  • Local controls optically isolated
  • With drain plug and V’ring sealing
  • Sealed for life bearings
  • Drive-end bearing cap
  • Power and control cables 500 mm long
  • Electronic protection: overload, over temperature and locked-rotor.
  • Fire mode (Override & Maximum speed mode)

W30 Smart EC IEC

Notes:

1. Totally Enclosed, Non-ventilated. Output limited to 0,65 kW. Refer to WEG for electrical data.
2. Totally Enclosed, Air Over rated. Minimum airflow over motor frame and drive cover 5 m/s.
3. The W30 Smart EC reaches the future IE6 level of efficiency, the highest in the market – considering 20% less losses then IE5 according to the standard IEC TS 60034-30-2 – for variable speed electric motor.

Optional Features:

  • Passive PFC (Power Factor Correction)4 – Single-phase
  • Pad mounting (4×90° or 3×120°) and FF-165 flange
  • Slinger seal for vertical shaft-up mounting
  • 115 V input power supply (up to 0,55 kW) – Single-phase
  • Decentralized drive and motor mounting
  • Customized shaft ends
  • Double shaft ends (only with decentralized drive version)
  • External controller with display to adjust maximum and instantaneous speed values

Notes:

4 – W30 Smart EC require the use of an external filter (passive PFC) to comply with the harmonic current emissions requirements of EN 61000-3-2. Refer to WEG for further details.

    Brand:

    Reviews

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.

    You cannot copy content of this page. © Copyright 2024-25 Voltonic Solution (Pvt.) Ltd